Bilt Hamber Touch System With Noodle Mitt

Bilt Hamber Touch System - Touchless car washing system, consisting of Touch-Less 5L, Touch-On 30ml Sachets (10 sachets) and a high quality Ricsar Noodle Wash Mitt.

TOUCH-LESS:

TOUCH-LESS is Bilt-Hamber's new eco-friendly snowfoam. It can be applied using most methods, such as via a pressure washer's chemical tank, a snow foam lance, pump sprayer, trigger/bottle etc. Just like Bilt-Hambers Auto Foam, Touch-Less is applied typically at 4% PIR, details on how to work this out are set out below. Touch-Less is a bio-degradable sugar-based product, which provides truly exceptional levels of cleaning of automotive paintwork. Unlike other petrochemical-based cleaners TOUCH-LESS offers easy rinsing, easing the effort of subsequent bucket washes and massively helping post-treatments bond too. TOUCH-LESS also contains corrosion inhibitors. Packed in 5 litre pH ~12, contains no phosphates, solvents, NTA, or caustic soda.

Ricsar Detailing Say: "Touch-Less was designed to be used alongside their new TOUCH-ON paint protection system, which when used in combination offers a truly touchless washing system. Touch-On offers fantastic hydrophobic (water beading) and self cleaning properties, which helps prevent dirt and oils from 'sticking' to the paint, which aids TOUCH-LESS in the cleaning process. TOUCH-LESS can be used as a standalone pre-wash, offering an alternative to their ever popular Autofoam. This environmentally friendly sugar based pre-wash is an extremely capable product, and definitely earns our respect and gains a place in our detailing arsenal."

TOUCH-ON:

TOUCH-ON is Bilt-Hamber's new superior paint protection and shampoo system. Touch-On promises simple application via a pressure washer chemical tank, pump sprayr, trigger, or bucket/wash mitt. Once applied, a coating of durable hydrophobic ceramic paint protection is added to the paints surface, offering great hydrophobics (water beading) and extremely capable self cleaning properties. The treatment is a low-foaming, powerful detergency (works as a shampoo too) for most second stage bucket washes so that you can further clean the paint while simultaneously applying protection. Once applied TOUCH-ON has dirt releasing properties too that works in conjunction with their new TOUCH-LESS snowfoam in subsequent wash routines to product superior contactless results. Packed in one dose sized 30ml sachets apply no more than 1 time per month.

TOUCH-ON is water based, is not flammable nor contains alcohol or petrochemical solvents.

Ricsar Detailing Say: "Bilt Hamber TOUCH-ON is an all new product from Bilt-Hamber, it has been designed to work in conjunction with their new Touch-Less snowfoam (although it can still be used as a standalone product). Bilt Hamber Touch-On works as a shampoo and a high quality sealant all in one sachet/use. The beading offered from Touch-On is similar to spray and rinse sealants, such as Gyeon WetCoat and CarPro Hydro2 Lite. Bilt Hamber Touch-On can also be used as a form of spray and rinse sealant itself, when applied via a snowfoam lance, pump spray or trigger & bottle.

When used as a with Touch-Less, you can create a truly contactless wash routine. Touch-On offers incredible beading and self cleaning properties, similar to those offered by a ceramic coating. This means that when its time to wash your car, the snowfoam Touch-Less (sold seperately) does a fantastic job of removing dirt. Touch-On, being a form of shampoo, then removes further dirt remaining on the paints surface.

On your initial use, we would highly recommend using a 'pure shampoo' such as Bilt Hamber Auto Wash, as this will help ensure the paint is in tip top condition for applying the Touch-On for the first time. Once the Touch-On has been applied, you will notice the self cleaning effects/hydrophobics on subsequent washes."

HOW TO USE - TOUCH-LESS SNOWFOAM:
TOUCH-LESS may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 2% PIR (Panel Impact Ratio) and up to 5% for very dirty vehicles. Where application is through trigger spray or pump spray, the dilution calculation is easy to achieve, however, for application with pressure equipment it is essential to determine the amount of water being delivered to the equipment reservoir.
Step 1

Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.

Step 2

The following calculations will achieve 4% dilution; Measure the total amount collected and multiply this number by 0.04 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of TOUCH-LESS to use.

Step 3

Add the calculated amount from STEP TWO to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments.

Step 4

Apply touchless to entire vehicle or panel by panel. Allow to soak for 1-5 minutes (but never allow to dry). Power-wash off.

It is not necessary to use all diluted touch-less in one wash. One litre of diluted product should last 4-5 washes. Apply to cool panels in shaded conditions. Do not allow this product to dry in use. Keep the bottle neck and lid clean.

HOW TO USE - TOUCH-ON SHAMPOO/SEALANT:

Empty 30ml sachet into empty power washer or lance reservoir, top up with clean water and apply at low pressure, then pressure rinse away and dry vehicle with a microfibre cloth.

Or...

Empty 30ml sachet into a 15 litre bucket of warm water and apply using noodle wash mitt. Rinse and dry with a microfibre cloth.

Can also be applied by trigger spray.

We do not recommend applying more than once a month. Car must not be allowed to air dry as water spotting may occur.

Ricsar Noodle Wash Mitt:

The Ricsar Chenille Wash Mitt is a super-soft microfibre wash mitt that will give your car a swirl-free wash.

These custom-made wash mitts have been designed to provide far greater performance than average wash mitts due to their extra soft fibres. The microfibre chenille safely and quickly removes dirt from your vehicles surface.

The long microfibre fingers hold an immense amount of soapy water and suds.They gently massage the dirt from the finish and take it deep into the fingers until rinsed away. When dipped in water the fingers on the mitt expand and release the trapped dirt.

• Super-soft microfibre wash mitt
• Safely and quickly removes dirt
• Helps provide a swirl-free wash