Koch Chemie Heavy Cut Sanding Polish H9.02 Polish

Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.02 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof). Cut: 9,0 Gloss: 6,0

Directions for use:
Wash the car thoroughly.

For cleaning, a classic wash with car shampoo is recommended, rust remover, tar remover, cleaning clay and insect remover. Remove any visible coarse dirt before using the abrasive polish.
Sometimes stubborn dirt sticks to the paint, such as insect droppings, tar or rust. These dirt can be gently removed with cleaning clay.

If you have a new paint without any significant signs of wear, you can polish directly after washing.

1. Shake well before use.
2. Apply an adequate amount to a dry polishing sponge and distribute. Do not use in direct sunlight or on hot surfaces.
3. Use Heavy Cut H9 either with a rotary polisher or with a large scale eccentric polishing machine.
4. Polish with medium pressure.
5. Reduce the pressure when the abrasive polish begins to dry.

6. At the beginning, the sanding polish is extremely sharp and then becomes increasingly finer. Nevertheless, there may be traces (especially with dark paints) even with proper application (holograms). These must then be removed using an anti-hologram polish or afterwards.
7. Remove residual material with a microfibre cloth.

Suitable for: used paint - new paint.

Polishing machine: Rotary Polisher - Orbital Polisher.
Processing: machine.